1000w solar panel wind turbine controller - wind turbine controller

1.1000w wind turbine PWM System Controller
2.300w solar panel PWM System Controller
3. Battery charge control
4. 2 way DC output
5. Timing output
6. Can use grid tie inverter together

This is a smart design for solar panel and wind turbine control system, you can use solar panel and wind turbine at the same time, so here is following details:

1.1000w wind turbine PWN System Controller:
Specification:
Watt: 1000w
Input: 0-100V 3 phase AC or DC 0-100V
DC output (for battery): 48V
DC floating Voltage: 54.4V
Low voltage input alarm: Yes
Over charge protect: Yes
Low voltage protect (for battery): 43.2V
High voltage protect (for battery): 55V
Wind turbine on/off control:
Before setting, turn to (BRAKE)
After setting, ready to go, turn to (RUN)

2.300W solar panel PWM System Controller:
Max watt: 300w for solar panel
Input: 56V-72V (for 48V solar panel)
DC output: 48V for battery
DC floating voltage: 54.4V
Low voltage input alarm: Yes
Over charge protect: Yes
Low voltage protect (for battery): 43.2V
High voltage protect (for battery): 55V

3. Battery charge control:
Rated Voltage: 48V
Max input voltage: 56V
Overcharge: Protection：57.6±0.2
Resume: 54.4±0.2

Over-discharge: Cut-off: 43.2±0.2
Resume: 49.2±0.2
Overload: Cut-off: 66.0
Resume: 60.0

4. 2 way DC output
First DC output is 48V
Second DC output is also 48V, but has timing control, Max hour is 15 hours

5．Can set up the lasting time that you want for the light

6. Wind turbine+wind turbine control+1200w grid tie inverter=whole wind turbine grid tie system